Toyota Camry Manual page 905

BRAKE SYSTEM – REAR BRAKE(Disc Brake)
3. INSTALL CYLINDER BOOT AND SET RING IN CYL–
INDER
4. INSTALL DUST BOOTS
(a) Place the caliper in vise.
(b) Using a 19 mm socket wrench and hammer, tap in 2
new dust boots into the torque plate.
(c) Confirm that the metal plate portion of the dust boot
fits snugly in the torque plate.
5. INSTALL MAIN PIN BOOT
6. INSTALL SLIDING BUSHING
CALIPER INSTALLATION
1. INSTALL MAIN PIN
Install the main pin and torque the main pin installa–
tion bolt.
Torque: 26 N–m (270 kgf–cm. 20 ft–lbf)
BR–219