Toyota Camry Manual page 224

AUTOMATIC TRANSAXLE –
3. ALIGN TRANSAXLE AT INSTALLATION POSITION
(a) Align the 2 knock pins on the block with the converter
housing.
(b) Temporarily install the bolt.
4. INSTALL TRANSAXLE TO ENGINE BOLTS
Install the transaxle to engine bolts.
12 mm head bolt
Torque: 64 N–m (650 kgf–cm, 47 ft–lbf)
10 mm head bolt
Torque: 46 N–m (470 kgf–cm. 34 ft–lbf)
5. INSTALL EXHAUST MANIFOLD PLATE
(a) Install the exhaust manifold plate.
(b) Install and torque the bolt and nut.
Torque: 20 N–m (200 kgf–cm, 14 ft–lbf)
(c) Install and torque the nut.
Torque: 20 N–m (200 kgf–cm, 14 ft–Ibf)
6. INSTALL TORQUE CONVERTER CLUTCH MOUNT–
ING BOLTS
(a) Clean the threads of the bolts with gasoline.
(b) Coat the threads of the bolts with sealer.
Sealer:
Part No.08833–00070, THREE BOND 1324 or equi–
valent
(c) Tighten the bolts evenly.
Torque: 27 N–m (280 kgf–cm, 20 ft–lbf)
HINT: First install dark green colored bolt and then the
5 bolts.
(d) Install the hole cover with 2 bolts.
ASSEMBLY REMOVAL AND INSTALLATION
AX2–37