BO–110
BODY
–
INSTRUMENT PANEL
HINT: Screw sizes in the illustration on the previous
page are indicated using the code below for removal
and installation of instrument panel.
INSTRUMENT PANEL REMOVAL
1. DISCONNECT BATTERY CABLE FROM NEGATIVE
TERMINAL
CAUTION: Work must be started after 90 seconds from
the time the ignition switch is turned to the 'LOCK'
position and the negative (–) terminal cable is discon–
nected from the battery.
2. REMOVE FRONT PILLAR GARNISH
(a) Sedan, Wagon: Remove the clips by your hand.