Toyota Camry Manual page 734

BR–48
BRAKE SYSTEM – REAR BRAKE(Disc Brake)
3. REMOVE 2 PADS
Remove the inside and outside pads.
4. REMOVE MAIN PIN
Loosen the. main pin installation bolt and remove the
main pin.
CALIPER DISASSEMBLY
1. REMOVE SLIDING BUSHING
Pull out the sliding bushing.
2. REMOVE MAIN PIN BOOT
Pull out the main pin boot.
3. REMOVE DUST BOOTS
(a) Place the caliper in vise.
(b) Using a screwdriver and hammer, tap out the 2 dust
boots.