Toyota Camry Manual page 59

AIR CONDITIONING SYSTEM
BLOWER RESISTOR
BLOWER RESISTOR REMOVAL
1. REMOVE INSTRUMENT LOWER FINISH PANEL
(See page BO–108)
2. REMOVE BLOWER RESISTOR
(a) Disconnect the connector from the resistor.
(b) Remove the 2 screws and the resistor.
BLOWER RESISTOR INSPECTION
INSPECT BLOWER RESISTOR CONTINUITY
Continuity
Condition
Constant
If continuity is not as specified, replace the blower
resistor.
Condition
Constant
If continuity is not as specified, replace the blower
resistor.
BLOWER RESISTOR INSTALLATION
1. INSTALL BLOWER RESISTOR
(a) Install the resistor with the 2 screws.
(b) Connect the connector to the resistor.
2. INSTALL INSTRUMENT LOWER FINISH PANEL
– BLOWER RESISTOR
Tester connectoin to
terminal number
1–2–3–6
Tester connectoin to
terminal number
t –2–3–5–6
AC–59
Specified value
Continuity
Specified value
Continuity