Toyota Camry Manual page 636

BODY – BACK WINDOW GLASS
9. COAT CONTACT SURFACE OF GLASS WITH
PRIMER 'G"
(SEE STEP 10 ON PAGE BO–79)
10. MIX ADHESIVE COATING
(SEE STEP 11 ON PAGE BO–79)
11. APPLY ADHESIVE
(SEE STEP 12 ON PAGE BO–79)
12. INSTALL GLASS
(SEE STEP 13 ON PAGE BO–80)
13. INSTALL BACK WINDOW MOULDING
Place the moulding onto the body and tap it by hand.
14. INSTALL BACK WINDOW LOWER MOULDING
Place the moulding onto the body and tap it by hand.
15. INSPECT FOR LEAKS AND REPAIR
(SEE STEP 14 ON PAGE BO–81)
16. CONNECT DEFOGGER WIRE CONNECTORS
17. INSTALL FOLLOWING PARTS:
(a) Rear side of roof headlining
(b) Assist grips
(c) Package tray trim
(d) Package tray trim garnish
(e) w/o Rear Spoiler:
High mount stop light
(f) Roof side inner garnish
(g) Rear seat back and seat cushion
Torque: 19 N–m (195 kgf–cm, 14 ft–lbf)
BO–85