Toyota Camry Manual page 646

BODY – BACK DOOR GLASS
BACK DOOR GLASS REMOVAL
1. REMOVE FOLLOWING PARTS:
(a) Back door trim upper board
(b) w/ High Mount Stop Light:
High mount stop light
(c) Back door trim cover LH
(d) Back door trim cover RH
2. DISCONNECT DEFOGGER WIRE CONNECTORS
3. REMOVE BACK DOOR MOULDING
Using a knife, cut off the moulding as shown.
NOTICE: Do not damage the body with the knife.
4. REMOVE BACK DOOR GLASS
(a) Remove 2 screws.
(b) Remove the glass in the same manner as windshield.
BO–95