Toyota Camry Manual page 99

AX1–26
AUTOMATIC TRANSAXLE –
31. REMOVE STIFFENER PLATE
(a) Hold the transaxle with a jack.
(b) Remove the 3 bolts and stiffener plate.
32. REMOVE REAR END PLATE
(a) Remove the 4 bolts.
(b) Remove the rear end plate.
33. REMOVE TORQUE CONVERTER CLUTCH MOUNT
– ING BOLT
(a) Turn the crankshaft to gain access to each bolt.
(b) Hold the crankshaft pulley nut with a wrench and
remove 6 bolts.
HINT: First remove dark green colored bolt and then
remove the others.
34. REMOVE 3 TRANSAXLE TO ENGINE BOLTS
ASSEMBLY REMOVAL AND INSTALLATION