Toyota Camry Manual page 48

AC–48
AIR CONDITIONING SYSTEM
7. REMOVE CONDENSER
Remove the 2 bolts and lean the radiator backward,
then remove the cond enser.
CONDENSER INSTALLATION
1. INSTALL CONDENSER
Install the condenser with the 2 bolt.
2. INSTALL LIQUID TUBES
Install both tubes with the 2 bolts.
Specified torque: 9.8 N–m (100 kgf–cm, 7 ft–lbf)
NOTICE: Do not remove caps until the tube is installed.
3. INSTALL COOLING FAN
4. REPLENISH COMPRESSOR OIL IF CONDENSER
HAS BEEN REPLACED
Add 40 cc (1.4 fl.oz.)
Compressor Oil:
5. EVACUATE AIR IN REFRIGERATION SYSTEM AND
CHARGE WITH REFRIGERANT
Specified amount:
6. INSPECT FOR LEAKAGE OF REFRIGERANT
Using a gas leak tester, check for leakage of refriger–
ant.
7. INSTALL REMOVAL PARTS
Install the removal parts in reverse order of removal
procedure.
– CONDENSER
ND OIL 8 or equivalent
850 50g (33.51 1.76 oz)