Toyota Camry Manual page 627

BO–76
BODY – WINDSHIELD
WINDSHIELD REMOVAL
1. REMOVE FOLLOWING PARTS:
(a) Inner rear view mirror
(b) Sunvisors and holders
(c) Front assist grip
(d) Interior light
2. REMOVE FRONT PILLAR GARNISH
(a) Sedan, Wagon: Remove the clips by your hand.
(b) Sedan, Wagon: Pull the garnish rearwards to remove
it.
(c) Coupe: Rear side garnish must be removed before
front piller garnish.
3. REMOVE HOOD
4. REMOVE FOLLOWING PARTS:
(a) Wiper arms
(b) Cowl louver
5. REMOVE WEATHERSTRIP
Remove the weatherstrip by pulling.
6. REMOVE WINDSHIELD OUTSIDE MOULDING
Remove 3 screws and the moulding.
7. REMOVE WINDSHIELD UPPER MOULDING
(a) Insert the top of scraper between the body and the
moulding.
HINT: Tape the scraper tip before use.
(b) Pry up the scraper to loosen the moulding from the
claw of the clips and retainers.
(c) Remove the moulding.