Toyota Camry Manual page 901

BRAKE SYSTEM – REAR BRAKE(Disc Brake)
(c) Install the caliper and torque the installation bolt.
Torque: 20 N–m (200 kgf–cm, 14 ft–lbf)
(d) Install the flexible hose bracket.
Torque: 29 N–m (300 kgf–cm, 22 ft–lbf)
9. INSTALL REAR WHEEL
14. CHECK THAT FLUID LEVEL IS AT MAX LINE
CALIPER REMOVAL
1. DISCONNECT FLEXIBLE HOSE
(a) Remove the union bolt and 2 gaskets from the caliper,
then disconnect the flexible hose from the caliper.
(b) Use a container to catch the brake fluid as it drains
out.
2. REMOVE CALIPER
(a) Remove the installation bolt.
(b) Remove the caliper from the torque plate.
BR–215