Toyota Camry Manual page 721

BRAKE SYSTEM – FRONT BRAKE(2–Piston Type)
2. INSTALL DUST BOOTS AND SLIDING PINS
(a) Using a 19 mm socket and a hammer, tap in 2 new
dust boots into the torque plate.
(b) Confirm that the metal plate portion of the dust boot
fits snugly in the torque plate.
(c) Insert 2 sliding pins into the torque plate.
NOTICE: Insert the sliding pin with sliding bushing into
the bottom side
3. INSTALL PISTON SEALS AND PISTONS IN CYLIN
– DER
4. INSTALL CYLINDER BOOTS AND CYLINDER BOOT
SET RINGS
CALIPER INSTALLATION
1. INSTALL FOLLOWING PARTS:
(a) 4 pad support plates
(b) 2 brake pads with anti–squeal shims
(c) 2 anti–squeal springs
BR–35