Toyota Camry Manual page 58

AC–58
AIR CONDITIONING SYSTEM
AIR OUTLET SERVOMOTOR
AIR OUTLET SERVOMOTOR REMOVAL
1. REMOVE INSTRUMENT LOWER FINISH PANEL
AND AIR DUCT
(See page BO–108)
2. REMOVE AIR DUCT NO. 2
3. REMOVE SERVOMOTOR
(a) Disconnect the connector.
(b) Remove the 2 screws and the servomotor.
AIR OUTLET SERVOMOTOR INSPECTION
INSPECT SERVOMOTOR OPERATION
(a) Connect the positive (+) lead from the battery to
terminal 6 and the negative (–) lead to terminal 7.
(b) Connect the negative (–) lead from the battery to
each terminal and check that the arm rotates to each
position as shown below.
Connected terminal
If operation is not as specified, replace the servomo–
tor.
AIR OUTLET SERVOMOTOR
INSTALLATION
1. INSTALL SERVOMOTOR
(a) Install the servomotor with 2 screws.
(b) Connect the connector
2. INSTALL HEATER DUCT
3. INSTALL LOWER FINISH PANEL
– AIR OUTLET SERVOMOTOR
Position
D EF
FOOT/DEF
FOOT
B/L
FACE