Toyota Camry Manual page 57

AIR CONDITIONING SYSTEM
AIR INLET SERVOMOTOR
AIR INLET SERVOMOTOR REMOVAL
1. REMOVE GLOVE COMPARTMENT
(See page BO–108)
2. REMOVE ECU AND ECU BRACKET
3. REMOVE SERVOMOTOR
(a) Disconnect the connector.
(b) Remove the 2 screws and the servomotor.
AIR INLET SERVOMOTOR INSPECTION
INSPECT SERVOMOTOR OPERATION
(a) Connect the positive (+) lead from the battery to
terminal 1 and the negative (–) lead to terminal 2,
check that the arm rotates to the "FRESH" side smoot–
hly.
(b) Connect the positive (+) lead from the battery to
terminal 1 and the negative (–) lead to terminal 3,
check that the arm rotates to the "RECI RC" side smo–
othly.
If operation is not as specified, replace the servo
motor.
AIR INLET SERVOMOTOR INSTALLATION
1. INSTALL SERVOMOTOR
(a) Install the servomotor with the 2 screws.
(b) Connect the connector.
2. INSTALL ECU AND ECU BRACKET
3. INSTALL GLOVE COMPARTMENT
– AIR INLET SERVOMOTOR
AC–57