Toyota Camry Manual page 629

BO–78
BODY – WINDSHIELD
4. INSTALL RETAINER
Install the retainers as shown.
5. INSTALL SPACER
6. POSITION GLASS
(a) Place glass in correct position.
(b) Check that all contacting parts of the glass rim are
perfectly even and do not make contact with the
fasteners.
(c) Place reference marks between the glass and body.
(d) Remove the glass.
7. CLEAN CONTACT SURFACE OF GLASS
Using a cleaner, clean the contact surface black–
colored area around the entire glass rim.
NOTICE: Do not touch the glass face after cleaning it.
8. INSTALL DAM
Install the dam with double–stick tape as shown in
the illustration.
NOTICE: Do not touch the glass face after cleaning it.