Toyota Camry Manual page 657

BO–106
BODY – SLIDING ROOF
4. INSTALL ROOF DRIP CHANNEL
(a) Push the channel rearwards to install it.
(b) Install 2 screws.
5. INSTALL FRONT AND REAR GARNISH
Tap the garnishes to install it.
6. INSTALL SLIDING ROOF GLASS
Install the glass and the shims with 6 nuts.
7. INSTALL DRIVE GEAR
(a) Remove the screw and cam plate cover.
(b) Remove the large screw, washers and shims.
(c) Turn the drive shaft by screwdriver to align the hous–
ing and gear point mark as shown.
(d) Install the cam plate cover with the screw.
(e) Apply adhesive to 2 gear side bolts.
Part No.08833–00070, THREE BOND 1324 or equivalent
(f) Install the drive gear with 3 bolts.
Torque: 5.4 N–m (55 kgf–cm, 48 in.–lbf)
(g) Connect the connectors.