Toyota Camry Manual page 665

BO–114
BODY – INSTRUMENT PANEL
17. REMOVE GLOVE COMPARTMENT DOOR
Remove 3 nuts and the door.
18. REMOVE GLOVE COMPARTMENT
HINT: Tape a screwdriver tip before use.
(a) Remove the glove compartment door finish plate
inside the instrument panel box.
NOTICE: When handling the airbag connector, take care
not to damage the airbag wire harness.
(b) Pull up and disconnect the airbag connector.
(c) Remove 5 screws.
(d) Remove the compartment by pulling.
19. REMOVE CENTER CLUSTER FINISH PANEL
Using a screwdriver, remove the panel then discon–
nect the connectors.
HINT: Tape the screwdriver tip before use.
20. REMOVE CLUSTER FINISH PANEL
(a) Remove 4 screws.
(b) Using a screwdriver remove the panel.
HINT: Tape the screwdriver tip before use.
(c) Disconnect the connectors.