BR–330
INSPECTION PROCEDURE
Check voltage between termi-
nals connector.
If the same code is still output after the diagnostic trouble code is deleted, check the contact condition
of each connection.
If the connections are normal, the ECU may be defective.
BRAKE SYSTEM
–
ANTI–LOCK BRAKE SYSTEM (ABS)
1 and
Disconnect the ABS ECU connector.
Measure voltage between terminals A5 1 and
A5 4 of ABS ECU harness side connector.
Voltage: 10–14 V
Check and repair harness or connector.
4 of ABS ECU