Toyota Camry Manual page 568

BODY – REAR BUMPER
REAR BUMPER REMOVAL
1. REMOVE REAR FLOOR FINISH PLATE
Remove the finish plate by pulling.
2. REMOVE REAR LUGGAGE TRIM
Using a clip remover, remove 4 clips and the trim.
3. REMOVE RIGHT SIDE LUGGAGE TRIM
Using a clip remover, remove 6 clips and the trim.
4. REMOVE LEFT SIDE LUGGAGE TRIM
Using a clip remover, remove 6 clips and the trim.
5. REMOVE REAR LICENSE PLATE LIGHT
Remove 3 screws and the light, then disconnect the
connector.
6. REMOVE REAR BUMPER COVER
(a) Remove 9 bolts and 10 nuts.
(b) Pull the cover rearwards to remove it.
BO–17