Toyota Camry Manual page 594

BO–43
BODY – REAR DOOR
(b) Attach the compression spring onto the cable.
(c) Attach the cable onto the cable guide.
(d) Attach the cable onto the drum.
HINT: Do not cross the cable ends.
(e) Wrap the cable around the drum from the top.
(f) Wrap the cable around the drum from the bottom.
HINT: Do not flip the drum while wrapping the cable
around it.
(g) Before installing the drum into the guide, verify that
the cable is not taut.
HINT: Verify that the cable ends are not crossed.
(h) Flip the drum over, and the cable will now be crossed.
(i) Verify that the cable is wrapped properly in the
groove.