INSPECTION PROCEDURE
Check ABS warning light.
See Combination Meter–Troubleshooting on page
Check for open in harness and connector between GAUGE fuse and ECU (See page IN–27).
Is diagnostic trouble code output?
Perform diagnostic trouble code check on page BR–143.
Does ABS warning light go off if short pin is removed?
YES
Check for short in harness and connector between DLC1 and ECU terminal WB (See page IN–27).
BRAKE SYSTEM
–
ANTI–LOCK BRAKE SYSTEM (ABS)
BE–1
18.
Replace bulb or combination meter assembly.
Repair circuit indicated by the code output.
YES
Check for short in harness and connector
between warning light and DLC1, DLC2 and
ECU terminal WA (See page IN–28).
BR–179