Toyota Camry Manual page 226

AUTOMATIC TRANSAXLE –
9. INSTALL FOUR LEFT SIDE TRANSAXLE MOUNT–
ING BOLTS
Torque: 52 N–m (530 kgf–cm. 38 ft–lbf)
10. INSTALL REAR SIDE MOUNTING BOLTS AND
NUTS
(a) Install and torque the 2 bolts and nuts.
Torque:66 N–m (670 kgf–cm, 48 ft–lbf)
(b) Install 2 hole plugs.
11. INSTALL FRONT SIDE ENGINE MOUNTING NUT
Torque: 80 N–m (820 kgf–cm, 59 ft–lbf)
12. INSTALL DRIVE SHAFT
(See page SA–25)
13. INSTALL RIGHT AND LEFT ENGINE SIDE COVER
NO.2
14. INSTALL ENGINE UNDER FRONT COVER NO.1 AND
NO.2
15. INSTALL DIFFERENTIAL FLUID DRAIN PLUG WITH
A NEW GASKET
16. FILL DIFFERENTIAL
Fluid Type:
ATF DEXRON
0.85 liters (0.9 US qts, 0.7 Imp. qts)
17. CHECK DIFFERENTIAL FLUID LEVEL
ASSEMBLY REMOVAL AND INSTALLATION
II Capacity:
AX2–39