Toyota Camry Manual page 323

BE–4
BODY ELECTRICAL SYSTEM
FUSE REPLACEMENT
HINT: If replacing the fuse be sure to replace it with a
fuse with an equal amperage rating.
NOTICE:
If a fuse or fusible link continues to blow, a short
circuit is indicated. The system must be checked by a
qualified technician.
HINT: The puller is located at Junction Block No.2.
– GENERAL INFORMATION
Turn off all electrical components and the ignition
switch before replacing a fuse or fusible link. Do
not exceed the fuse or fusible link amperage rating.
Always use a fuse puller for removing and inserting
a fuse. Remove and insert straight in and out with–
out twisting. Twisting could force open the termi–
nals too much, resulting in a bad connection.