Toyota Camry Manual page 210

AUTOMATIC TRANSAXLE –
8. INSTALL OIL STRAINER AND APPLY TUBE BRACK–
ET
Install the oil strainer.
Torque: 11 N–m (110 kgf–cm, 8 ft–Ibf)
Install the tube bracket.
Torque: 10 N–m (100 kgf–cm, 7 ft–Ibf)
HINT: Each bolt length (mm, in.) is indicated in the
illustration.
9. INSTALL MAGNETS
NOTICE: Make sure that the magnet does not interfere
with the oil tubes.
10. INSTALL OIL PAN
(a) Install a new gasket and oil pan.
(b) Install and torque 17 bolts.
Torque: 4.9 N–m (50 kgf–cm, 43 ft–lbf)
11. FILL TRANSAXLE WITH ATF
NOTICE: Do not overfill.
Fluid type:
ATF DEXRON_II
12. CHECK FLUID LEVEL (See page AX2–68)
ON–VEHICLE REPAIR
AX2–23