Toyota Camry Manual page 906

BR–220
BRAKE SYSTEM – REAR BRAKE(Disc Brake)
2. INSTALL 2 PADS
Install 2 pads with the pad wear indicator plate facing
upward.
NOTICE: There should be no oil or grease adhering to the
friction surfaces of the pads or the disc.
3. INSTALL CALIPER
Install the caliper and torque the installation bolt.
Torque: 20 N–m (200 k9f¿cm, 14 ft–lbf)
4. CONNECT FLEXIBLE HOSE
Install the flexible hose on the caliper with 2 new
gaskets.
Torque: 29 N–m (300 kgf–cm, 21 ft–Ibf)
HINT: Insert the flexible hose lock securely in the lock
hole in the caliper.
5. FILL BRAKE RESERVOIR WITH BRAKE FLUID AND
BLEED BRAKE SYSTEM
(See page BR–9)
6. CHECK FOR LEAKS