Toyota Camry Manual page 546

INSPECTION PROCEDURE
Check STOP fuse.
Check voltage between terminals BATT
and body ground.
Check and repair harness and connector
between battery and cruise control ECU.
BODY ELECTRICAL SYSTEM – CRUISE CONTROL SYSTEM
Remove STOP fuse from JIB No. 1.
Check continuity of STOP fuse.
Continuity
Check for short in all the harness and
components connected to the STOP fuse
(See attached wiring diagram).
of cruise control ECU connector
Remove cruise control ECU with connectors still
connected.
Measure voltage between terminal BATT of
cruise control ECU connector and body ground.
Voltage: 10 – 14 V
Proceed to next circuit inspection shown
on matrix chart (See page BE–178).
BE–227