Toyota Camry Manual page 897

BRAKE SYSTEM – REAR BRAKE(Drum Brake)
(c) Align the adjusting hole on the brake drum and largest
hole on the axle carrier, install the brake drum.
(d) Pull the parking brake lever all the way up until a
clicking sound can no longer be heard.
9. CHECK CLEARANCE BETWEEN BRAKE SHOES
AND DRUM
(a) Remove the brake drum.
(b) Measure the brake drum inside diameter and diameter
of the brake shoes. Check that the difference between
the diameters is the correct shoe clearance.
Shoe clearance:
0.6 mm (0.024 in.)
If incorrect, check the parking brake system.
10. INSTALL BRAKE DRUM
11. INSTALL REAR WHEEL
12. FILL BRAKE RESERVOIR WITH BRAKE FLUID AND
BLEED BRAKE SYSTEM
(See page BR–9)
13. CHECK FOR LEAKS
BR–211