Toyota Camry Manual page 643

BO–92
BODY – QUARTER WINDOW GLASS
3. INSTALL FOLLOWING PARTS:
(a) Front door weatherstrip.
(b) Quarter trim board
(c) Front door scuff plate
(d) Roof side inner garnish
(e) Rear seat outer belt anchor
Torque: 43 N–m (440 kgf–cm. 32 ft–lbf)
(f) Front seat outer belt bezel
(g) Front seat outer belt shoulder anchor
Torque: 43 N–m (440 kgf–cm, 32 ft–lbf)
(h) Rear side seat back
Torque: 19 N–m (195 kgf–cm, 14 ft–lbf)
(i) Rear seat cushion
QUARTER WINDOW GLASS
INSTALLATION
Wagon:
1. CLEAN BODY OR GLASS
Wipe off any adhesive left on the body and glass with
cleaner.
2. INSTALL QUARTER WINDOW GLASS
(a) Apply adhesive at glass installation area.
(b) Install the glass to the body.
(c) Install 9 nuts.
3. INSTALL QUARTER WINDOW MOULDING
(a) Install the quarter window belt moulding.
(b) Install the quarter window rear moulding.
(c) Install the quarter window upper moulding.
(d) Install the quarter window front moulding.
4. INSTALL FOLLOWING PARTS:
RIGHT SIDE:
(a) Roof side inner garnish RH