Toyota Camry Manual page 570

Hide thumbs Also See for Camry:

12. REMOVE REAR BUMPER ARM

(a) Remove 2 grommets.

(6) Remove 2 bolts and the bumper arm_

REAR BUMPER INSTALLATION

INSTALL REAR BUMPER PARTS BY FOLLOWING RE–

MOVAL SEQUENCE IN REVERSE

1. INSTALL FOLLOWING PARTS:

(a) Rear bumper arm

Torque: 79 N–m (810 kgf–cm, 59 ft–lbf)

(b) Rear bumper reinforcement

Torque: 43 N–m (440 kgf–cm, 32 ft–lbf)

2. INSTALL REAR BUMPER SIDE SUPPORT

(a) Place the side support in the bumper cover.

(b) Using a riveter, install 3 rivets.