Toyota Camry Manual page 565

BO–14
BODY – FRONT BUMPER
16. REMOVE FRONT BUMPER ARM
Remove 3 nuts and the bumper arm.
FRONT BUMPER INSTALLATION
INSTALL FRONT BUMPER PARTS BY FOLLOWING RE–
MOVAL SEQUENCE IN REVERSE
1. INSTALL FOLLOWING PARTS:
(a) Front bumper arm
Torque: 8.8 N–m (90 kgf–cm, 78 in.–lbf)
(b) Front bumper reinforcement
Torque: 8.8 N–m (90 kgf–cm, 78in.–lbf)
(c) Reinforcement extension
Torque: 21 N–m (210 kgf–cm. 15 ft.–lbf)
2. INSTALL FRONT BUMPER SIDE SUPPORT
(a) Place the side support in the bumper cover.
(b) Using a riveter, install 2 rivets.