BODY ELECTRICAL SYSTEM
(e) After connecting terminal B–4 to terminal B–18,
connect to terminal B–16.
Then, check that the voltage rises from 0 V to battery
positive voltage within the times, as shown in the
table.
If operation is not as specified, replace the switch.
I NT time control
switch position
FAST
SLOW
Non variable type
Washer Linked Operation
(a) Connect the positive (+) lead from the battery to
terminal 13– 18 and the negative (–) lead to terminal B
–16.
(b) Connect the positive (+) lead from the voltmeter to
terminal B–7 and the negative (–) lead to terminal B
–16.
(c) Push the washer switch, check that the voltage cha–
nges, as shown in the table.
If operation is not as specified, replace the wiper and
washer switch.
–
WIPER AND WASHER SYSTEM
BE–55
Voltage