Toyota Camry Manual page 103

AX1–30
AUTOMATIC TRANSAXLE –
11. INSTALL 3 REAR SIDE ENGINE MOUNTING NUTS
Torque: 66 N–m (670 kgf–cm, 48 ft–Ibf)
12. INSTALL FRONT SIDE ENGINE MOUNTING NUT
Torque: 80 N–m (820 kgf–cm, 59 ft–lbf)
13. INSTALL DRIVE SHAFT
(See page SA–40)
14. INSTALL RIGHT AND LEFT ENGINE SIDE COVER
N O.2
15. INSTALL ENGINE UNDER FRONT COVER NO.1 AND
NO.2
16. INSTALL DIFFERENTIAL FLUID DRAIN PLUG WITH
A NEW GASKET
17. FILL DIFFERENTIAL FLUID
Fluid Type:
ATF DEXRON
Capacity:
Differential 1.6 liters (1.7 US qts, 1.4 Imp. qts)
18. CHECK DIFFERENTIAL FLUID LEVEL
19. INSTALL EXHAUST PIPE
(a) Install and torque the 3 nuts.
Torque: 62 N–m (630 kgf–cm, 46 ft–lbf)
ASSEMBLY REMOVAL AND INSTALLATION
_
ll