Toyota Camry Manual page 347

BE–28
BODY ELECTRICAL SYSTEM
COMBINATION SWITCH INSTALLATION
For installation, follow the removal procedure in re–
verse.
(MAIN POINT OF INSTALLATION)
ADJUSTMENT OF SPIRAL CABLE
(a) Check that the front wheels are facing straight ahead.
(b) Turn the spiral cable counterclockwise by hand until it
becomes harder to turn the cable.
(c) Then rotate the spiral cable clockwise about 3 turns to
align the red mark.
HINT:
(d) Install the steering wheel so that the match marks will
not be misaligned.
– HEADLIGHT AND TAILLIGHT SYSTEM
The spiral cable will rotate about 3 turns to either
left or right of the center.
The connector should be straight up.