Toyota Camry Manual page 554

BODY – GENERAL INFORMATION
ANTI–RUST TREATMENT
Anti–rust treatment used on the vehicle body in–
cludes body sealer, undercoat, rust inhibitor and paint.
HINT: Refer to the Body Collision Damage 'Repair
Manual for details of which parts have received anti –
rust treatment.
Body Sealer
If the body sealer is damaged (peeling, cracks, etc.)
during the operation, replace it with new body sealer.
HINT: If body sealer gets on other parts, promptly
wipe it off with a clean cloth dipped in a grease, wax
and silicone remover.
Undercoat
If the undercoat is damaged during the operation,
apply new undercoat.
HINT:
Cover the surrounding area with masking paper
to avoid applying undercoat where it is not
needed.
Do not apply undercoat to high temperature
parts such as the tailpipe, or to drive parts such
as the drive shaft.
Rust Inhibitor
After removing and re–installing hinges and outer
panel parts, apply rust inhibitor to the parts.
HINT: If rust inhibitor gets spilled on other parts,
promptly wipe it off with a clean cloth dipped in a
grease, wax and silicon remover.
Touch– Up Paint
If a small scratch is made in the body surface, correct
the scratch using touch–up paint the same color as
the body color.
BO–3