Toyota Camry Manual page 697

BRAKE SYSTEM – CHECK AND ADJUSTMENT
(c) Tighten the lock nut.
Torque: 5.4 N–m (55 kgf–cm. 48 in.¿lbf)
(d) Install the rear console box.
PEDAL TYPE PARKING BRAKE CHECK
AND ADJUSTMENT
1. CHECK THAT PARKING BRAKE PEDAL TRAVEL IS
CORRECT
Slowly depress the parking brake pedal all the way,
and count the number of clicks.
Parking brake pedal travel at 294 N (30 kgf,66 lbf):
3–6 clicks
If incorrect, adjust the parking brake.
2. IF NECESSARY, ADJUST PARKING BRAKE PEDAL
TRAVEL
HINT: Before adjusting the parking brake, make sure
that the rear brake shoe clearance has been adjusted.
For shoe clearance adjustment, see step 8 on page BR
–58.
(a) Remove the hole cover.
(b) Loosen the lock nut and turn the adjusting nut until
the lever travel is correct.
(c) Tighten the lock nut.
Torque: 13 N–m (130 kgf–cm, 9 ft–lbf)
(d) Install the hole cover.
BR–11