Toyota Camry Manual page 711

BRAKE SYSTEM – FRONT BRAKE(Single–Piston Type)
2. REMOVE PISTON
(a) Place a piece of cloth or similar article between the
piston and the caliper.
(b) Use compressed air to remove the piston from the
cylinder.
CAUTION: Do not place your fingers in front of the piston
when using compressed sir.
3. REMOVE PISTON SEAL
Using a screwdriver, remove the piston seal from the
cylinder.
4. REMOVE SLIDING PINS AND DUST BOOTS
(a) Remove the 2 sliding pins from the torque plate.
(b) Using a screwdriver and hammer, tap out the 2 dust
boots.
BR–25