Toyota Camry Manual page 948

BR–262
BRAKE SYSTEM – ANTI–LOCK BRAKE SYSTEM (ABS)
DIAGNOSTIC TROUBLE CODE CHECK
USING TOYOTA HAND–HELD TESTER
1. Hook up the Toyota hand–held tester to the DLC2.
2. Read the diagnostic trouble codes by following the prompts
on the tester screen.
Please refer to the Toyota hand–held tester operator's
manual for further details.
DIAGNOSTIC TROUBLE CODE CLEARANCE
1. Using SST, connect terminals Tc and E1 of DLC2 or DLC1
and remove the short pin from DLC1.
SST 09843–18020
2. IG switch ON.
3. Clear the diagnostic trouble codes stored in ECU by de–
pressing the brake pedal 8 or more times within 3 seconds.
4. Check that the warning light shows the normal code.
5. Remove the SST from the terminals of DLC2 or DLC1.
6. Connect the Short Pin to DLC1
HINT: Cancellation can also be done by removing the ECU–13
fuse, but in this case, other memory systems will also be
cancelled out.
ECU TERMINAL VALUES MEASUREMENT
USING TOYOTA BREAK–OUT–BOX AND TOYOTA
HAND–HELD TESTER
1. Hook up the Toyota break–out–box and Toyota hand–held
tester to the vehicle.
2. Read the ECU input/output values by following the prompts
on the tester screen.
HINT: Toyota hand–held tester has a "Snapshot" function.
This records the measured values and is effective in the
diagnosis of intermittent problems.
Please refer to the Toyota hand–held tester/Toyota break–
out–box operator's manual for further details.