Toyota Camry Manual page 647

BO–96
BODY – BACK DOOR GLASS
BACK DOOR GLASS INSTALLATION
HINT: Install the glass in the same manner as the
windshield.
1. CLEAN AND SHAPE CONTACT SURFACE OF BODY
2. CLEAN REMOVED GLASS
3. POSITION GLASS
4. CLEAN CONTACT SURFACE OF GLASS
5. COAT CONTACT SURFACE OF BODY WITH
PRIM ER "M"
6. COAT CONTACT SURFACE OF GLASS WITH
PRIM ER "G"
7. MIX ADHESIVE COATING
8. APPLY ADHESIVE
9. INSTALL GLASS
10. INSTALL BACK DOOR MOULDING
Place the moulding onto the body and tap it by hand.
11. INSPECT FOR LEAKS AND REPAIR
12. CONNECT DEFOGGER WIRE CONNECTORS
13. INSTALL FOLLOWING PARTS:
(a) Back door trim cover RH
(b) Back door trim cover LH
(c) w/ High Mount Stop Light:
High mount stop light
(d) Back door trim upper board