Toyota Camry Manual page 351

BE–32
Tester connection to
terminal number
BODY ELECTRICAL SYSTEM
DAYTIME RUNNING LIGHT RELAY (MAIN)
INSPECTION (for CANADA)
INSPECT DAYTIME RUNNING LIGHT RELAY
(MAIN)
Circuit/ Wire Harness Side
Disconnect the connector from relay and inspect the
connector on wire harness side, as shown.
Condition
Light control switch position OFF or TAIL
Light control switch position HEAD
Headlight dimmer switch position Low beam
or high beam
Headlight dimmer switch position Flash
Parking brake switch position OFF
Parking brake switch position ON
Constant
Headlight dimmer switch position Low beam
Headlight dimmer switch position Flash or
High beam
Condition
Ignition switch position LOCK or ACC
Ignition switch position ON or START
Constant
Engine Stop
Engine Running
If circuit is as specified, perform the inspection on the
following page.
If circuit is not as specified, inspect the circuits con–
nected to other parts.
– HEADLIGHT AND TAILLIGHT SYSTEM
Specified value (Continuity)
No continuity
Continuity
No continuity
Continuity
No continuity
Continuity
Continuity
No continuity
Continuity
No voltage
Battery positive voltage
Battery positive voltage
No voltage
Battery positive voltage
Specified value (Voltage)