Toyota Camry Manual page 395

BE–76
Tester connection to
terminal number
A1 – Ground
A7 – Ground
A9 – Ground
A7 – Ground
A9 – Ground
BODY ELECTRICAL SYSTEM
Condition
Constant
Ignition switch position OFF or ACC
Ignition switch position ON
If circuit is as specified, trying replacing the relay with
a new one.
Is circuit is not as specified, inspect the circuits con–
nected to other parts.
BUCKLE SWITCH INSPECTION
INSPECT BUCKLE SWITCH
w/o POWER SEAT:
Continuity
(a) Check that there is continuity between terminals on
the switch side connector with the switch ON (belt
fastened).
(b) Check that there is no continuity between terminals
on the switch side connector with the switch OFF
(belt unfastened).
If operation is not as specified, replace the seat belt
inner belt.
– COMBINATION METER
Battery positive voltage
No voltage
Battery positive voltage
Specified value (Voltage)