Toyota Camry Manual page 61

AIR CONDITIONING SYSTEM
PRESSURE SWITCH REMOVAL
1. DISCHARGE REFRIGERANT IN REFRIGERATION
SYSTEM
2. REMOVE PRESSURE SWITCH
(a) Disconnect the connector.
(b) Remove the pressure switch from the liquid tube.
HINT: Lock the switch mount on the tube with an
open end wrench, being careful not to deform the
tube, and remove the switch.
PRESSURE SWITCH INSTALLATION
1. INSTALL PRESSURE SWITCH
(a) Install the pressure switch to the liquid tube.
Torque: 9.8 N–m (100 kgf–cm, 7 ft–lbf)
HINT: Lock the switch mount on the tube with an
open end wrench, being careful not to deform the
tube, and install the switch.
(b) Connect the connector.
2. EVACUATE AIR IN REFRIGERATION SYSTEM AND
CHARGE WITH REFRIGERANT
Specified amount:
3. INSPECT FOR LEAKAGE OF REFRIGERANT
Using a gas leak tester, check for leakage of refriger–
ant from the pressure switch mount.
4. INSPECT A/C OPERATION
– PRESSURE SWITCH
850 50 g (29.98 1.76 oz)
AC–61