Toyota Camry Manual page 393

BE–74
BODY ELECTRICAL SYSTEM
OPEN DOOR WARNING LIGHT
INSPECTION
INSPECT OPEN DOOR WARNING LIGHT
Disconnect the connector from the door courtesy
switch, and ground terminal 1 on the wire harness
side connector and check that the warning light lights
up.
If the warning light does not light up, inspect the bulb
or wire harness.
DOOR COURTESY SWITCH
See page BE–43.
SEAT BELT WARNING LIGHT INSPECTION
INSPECT SEAT BELT WARNING LIGHT
(a) Remove the integration relay from the junction block
No. 1.
(b) Ground terminal A9 on the junction block side con–
nector.
(c) Turn the ignition switch ON, check that the warning
light lights up.
If the warning light does not light up, inspect the bulb
or wire harness.
– COMBINATION METER