Toyota Camry Manual page 620

BODY – BODY OUTSIDE MOULDING
2. REMOVE REAR DOOR BELT MOULDING
Pry out the clips from the edge of the weatherstrip
and remove the moulding.
3. REMOVE REAR DOOR REAR FRAME MOULDING
(a) Remove 2 screws and the nut.
(b) Pry out the clips and remove the moulding.
4. REMOVE REAR DOOR FRONT FRAME MOULDING
(a) Remove 3 screws and the nut.
(b) Pry out the clips and remove the moulding.
5. REMOVE REAR DOOR UPPER MOULDING
Remove 3 screws and the moulding.
6. INSTALL FOLLOWING PARTS:
(a) Rear door upper moulding
(b) Rear door front frame moulding
(c) Rear door rear frame moulding
(d) Rear door belt moulding
(e) Rear door component parts
BO–69