Toyota Camry Manual page 601

BO–50
BODY – BACK DOOR
BACK DOOR ADJUSTMENT
1. ADJUST DOOR IN FORWARD / REARWARD AND
LEFT /RIGHT DIRECTIONS
(a) Remove the rear header trim.
(b) Loosen the body side hinge nuts to adjust.
Torque: 13 N–m (130 kgf–cm, 9.4 ft–lbf)
(c) Install the rear header trim.
(d) Install the rear seat side cushion.
Torque: 19 N–m (195 kgf–cm, 14 ft–lbf)
2. ADJUST DOOR IN LEFT /RIGHT AND VERTICAL
DIRECTIONS
Loosen the door side hinge bolts to adjust.
Torque: 13 N–m (130 kgf–cm, 9.4 ft–lbf)
3. ADJUST DOOR LOCK STRIKER
(a) Remove rear floor finish plate by pulling.
(b) Loosen the striker mounting screws to adjust.
(c) Using a plastic hammer, tap the striker to adjust it.
(d) Install the rear floor finish plate.