BO–38
BODY
–
REAR DOOR
4. REMOVE DOOR TRIM
HINT: Tape the screwdriver tip before use.
(a) Remove 4 clips.
(b) Using a screwdriver, remove the screw cap.
(c) Remove 2 screws.
(d) Insert the screwdriver between the door and the door
trim to pry out.
(e) Pull the trim upwards to remove it then disconnect the
connector.
(f) Remove the inner weatherstrip.
(g) Remove 6 screws and the armrest.
5. REMOVE DOOR INSIDE HANDLE
(a) Disconnect 2 links.
(b) Remove 3 screws and the handle.
6. REMOVE SERVICE HOLE COVER
(a) w/ Power Window:
Using a clip remover, remove 2 screw grommets.
w/o Power Window:
Using a clip remover, remove 3 screw grommets.
(b) Remove service hole cover.
7. REMOVE DOOR GLASS RUN
Pull the glass run upwards to remove it.