Toyota Camry Manual page 50

AC–50
AIR CONDITIONING SYSTEM
EVAPORATOR INSTALLATION
1. INSTALL REMOVAL PARTS
Install the removal parts in reverse order of removal
procedure.
HINT:
The tightening torque for the bolt used to install
the expantion valve on the evaporator is shown
below.
Torque: 5.4 N–m (55 kgf–cm, 48 in.–lbf)
The tightening torque for the bolts used to install
the liquid and suction tube is shown below.
Torque: 9.8 N–m (100 kgf–cm, 7 ft–lbf)
2. REPLENISH COMPRESSOR OIL IF EVAPORATOR
HAS BEEN REPLACED
Add 40 cc (1.4 fl.oz)
Compressor oil:
3. EVACUATE AIR IN REFRIGERATION SYSTEM AND
CHARGE WITH REFRIGERANT
Specified amount:
4. INSPECT FOR LEAKAGE OF REFRIGERANT
Using a gas leak tester, check for leakage of refriger–
ant.
– EVAPORATOR
ND OIL 8 or equivalent
850 50g (29.98 1.76 oz)