Toyota Camry Manual page 667

BO–116
BODY – INSTRUMENT PANEL
25. REMOVE DUCT HEATER TO REGISTER NO. 2
Remove the clip and the register No.2.
26. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(a) Remove the LH side installation bolt.
(b) Remove 5 bolts and 2 clips.
CAUTION:
Do not store the front passenger airbag assembly
with the airbag door facing down.
Never disassemble the front passenger airbag as–
sembly.
27. REMOVE SIDE DEFROSTER NOZZLE NO. 2
Using a screwdriver, remove the nozzle No.2.
HINT: Tape the screwdriver tip before use.
28. REMOVE INSTRUMENT PANEL
(a) Disconnect the connectors.
(b) Remove the bolt.
(c) Remove the connector holder.