Toyota Camry Manual page 903

Hide thumbs Also See for Camry:

BRAKE SYSTEM

REAR BRAKE(Disc Brake)

4. REMOVE CYLINDER BOOT SET RING AND CYLIN–

Using a screwdriver, remove the cylinder boot set ring

and cylinder boot from the cylinder.

5. REMOVE PISTON

(a) Place a piece of cloth or similar article between the

piston and the caliper.

(b) Use compressed air to remove the piston from the

CAUTION: Do not place your fingers in front of the piston

when using compressed air.

6. REMOVE PISTON SEAL

Using a screwdriver, remove the piston seal from the

REAR DISC BRAKE COMPONENTS

INSPECTION AND REPAIR

1. MEASURE PAD LINING THICKNESS

Using a ruler, measure the pad lining thickness.

Standard thickness:

10.0 mm (0.394 in.)

Minimum thickness:

1.0 mm (0.039 in.)

Replace the pad if the pad's thickness is at the mini–

mum thickness or less, or if the pad has excessively

uneven wear.