BO–44
BODY
–
REAR DOOR
REAR DOOR ASSEMBLY
1. BEFORE INSTALLING PARTS, COAT THEM WITH
MP GREASE
(a) Apply MP grease to the window regulator rollers.
(b) Apply MP grease to the sliding surface of the door
lock.
2. INSTALL OUTSIDE HANDLE
Install the outside handle with 2 bolts.
3. INSTALL DOOR LOCK
(a) Apply adhesive to 3 screws.
Part No.08833–00070, THREE BOND 1324 or equivalent
(b) Install the door lock with 3 screws.
Torque: 5.4 N–m (55 kgf–cm, 48 in.–lbf)
(c) w/ Power Door Lock:
Connect the connector.
(d) Connect 2 links to the door lock.
(e) Install the clip.
4. INSTALL CHILD PROTECTOR LOCK LEVER KNOB
5. INSTALL WINDOW REGULATOR
(a) Place the regulator through the service hole.
(b) w/ Power Window:
Connect the connector.
(c) Install the regulator with 2 nuts.
Torque: 5.4 N–m (55 kgf–cm, 48 in.–lbf)