AC–72
AIR CONDITIONING SYSTEM
Terminal
Switch position
OFF
If continuity is not as specified, replace the switch.
A/C CONTROL CABLES ADJUSTMENT
1.
ADJUST AIR INLET DAMPER CONTROL CABLE
Set the air inlet damper and the control lever to "
FRESH" position, install the control cable and lock the
clamp.
2.
ADJUST AIR MIX DAMPER CONTROL CABLE
Set the air mix damper and control switch to "COOL"
position, install the control cable and lock the clamp
while lightly pushing the outer cable in the direction
shown by the arrow.
A/C CONTROL ASSEMBLY
INSTALLATION
(See page BO–108)
–
AIR CONDITIONING CONTROL ASSEMBLY